Poultry House Equipment (more)
- Can be used for total cleanout or to remove wet, caked litter while reconditioning and allowing finer particles to be sifted back on floor to reduce replacement costs
- Cleans close to walls to save time and labor expense
- Unloads quickly to avoid waiting and can be used for spreading or replacing shavings with optional spreading attachment
- Overhead conveyor keeps litter spread evenly for full capacity loading
|
The KMC Disc Mower Caddy is a pull type unit designed for attachment of a disc mower in order to provide all the benefits of a pull type mower.
|
Key Features
· The basic frame provides an adjustable height clevis hitch for attaching to the tractor drawbar and a 3 point hitch for attachment of the disc mower on the rear.
· The basic construction is solid welded, tubular combination of 7” x 7”, 4” x 7” and 3” x 6” with the left side (off side from mower) 7” x 7” weighted for counter balance to provide safer use and transport.
· Two wheels (one on each side) are staggered, and 11L x 15 ribbed implement tires are standard.
· An equal angle heavy-duty 540 RPM PTO drive line is provided to minimize thrust loads and improve bearing life.
· A screw type adjustable jack stand is mounted to the tongue of the caddy.
· The unit with mower attached requires only one remote and the hydraulic hose plumbing is standard.
· The standard 3 point stationary hitch provides 3-hole height adjustment for leveling the mower.
· An optional hydraulic lift 3 point hitch is available that utilizes a 2” x 8” hydraulic cylinder. The optional lift kit is required to operate certain make disc mowers. (Deere, Kuhn, Gehl, Land Pride after serial number #253044, Taarup/new Bush Hog, and old style New Holland. Series 3 Krone Mowers require a hitch extension kit to raise the lower hitch.
· An optional 300 pound weight is available to add to the frame on the off side from the mower to give additional counter balance for improved stability with bigger model disc mowers. A 10 ply tire on the mower side of the caddy is recommended for use with the bigger model disc mowers.
Benefits
· Eliminates difficult 3 point lift attachment to tractor.
· Allows use of smaller tractors that don’t have the lift capacity to handle disc mowers.
· Allows for better handling and sharper turns.
· Takes vibration out of the tractor.
· Available in models for use with virtually any make and model disc mower.
|
The KMC Dirt Pan provides the best in land forming equipment. These units are delivered complete and ready for work. All "the extras" are included in the price.
|
Key Features
· Formed Hydraulic Lines produce minimum velocity loss and heat buildup for longer cylinder life, and insure efficient operation on the hardest ground.
· Reversible Cutting Edge doubles blade life and insures efficient operation on the hardest ground.
· Flexible Hitch Design permits scraper to follow roughest terrain and eliminates problems and breakage in ball joints.
· Heavy-Duty Welding adds extra strength to make the Rayne Scraper the toughest, hardest-to-kill land-forming tool available today.
· Frost Bit optional an all models.
· Single Hydraulic Control lever lets operator handle tandem scrapers with one tractor unit for ease in operation.
· Replacement Spindles, with extra-heavy duty wheels and hubs, are bolted rather than welded in place to permit rapid changes.
· High-Flotation Tires eliminate frame strain for easy rolling on all types of terrain.
Benefits
- Greater operating efficiency.
- No gouging the cut area.
- Smaller particles of soil (tighter nesting, less porosity).
- Better redistribution in lift (fill area).